Hobart HL600-1STD Planetary Mixer – 60 Qt

MOTOR:
2.7 H.P. high torque motor.
200-240/50/60/3/1 18.0 (1 Phase) Amps
10.0 (3 Phase) Amps
380-460/50/60/3 6.5 Amps
ELECTRICAL:
200-240/50/60/3/1, 380-460/50/60/3 – UL Listed.
CONTROLS:
Magnetic contactor with thermal overload protection.
Internally sealed “Start-Stop” and Power Bowl Lift push
buttons. Reduced voltage pilot circuit transformer is
supplied for 380-460/50/60/3 machines. A 50-minute
SmartTimer™ is standard. SmartTimer™ includes
Automatic Time Recall, which remembers the last
time set for each speed. Optional SmartPlus™
Programmable Recipe Timer allows operators the
ability to program up to 9 recipes with 6 steps per
recipe. SmartPlus™ automatically changes speeds and
starts timer count-down without operator intervention.
TRANSMISSION:
A rated 5.4 H.P. poly-V belt transfers power from
motor to the input shaft then geared down to desired
reduction with a constant gear mesh. Gears and
shafts are heat-treated hardened alloy steel along with
anti-friction ball bearings. Circulating oil and grease
lubricants furnished to all gears and shafts.
BOWL GUARD:
Heavy-duty stainless steel wire front and solid stainless
steel rear portion. Front portion of guard rotates easily
to add ingredients and install or remove agitator.
It detaches in seconds for cleaning in dishwasher or
sink. Rear portion of guard can be quickly cleaned in
position. Guard must be in closed position before mixer
will operate. Bowl support interlock provides further
protection.
POWER BOWL LIFT:
Powered by an electric motor, the bowl may be raised
or lowered by fingertip control through the conveniently
located switch. Bowl will remain in position until switch
is activated. Stir-on-Lift Feature: Allows the agitator to
run in Stir Speed while the mixer bowl is being raised.
Once the bowl is in the raised position, the mixer automatically shifts into the preselected speed.
FINISH:
Metallic Gray Hybrid Powder Coat finish.
FOOTPADS:
Neoprene footpads are standard.
ATTACHMENT HUB:
Comes with front-mounted Hobart standard #12 taper
attachment hub for use with #12 size attachments.
ATTACHMENTS AND ACCESSORIES:
The following are available at extra cost:
Stainless Steel Bowl Bowl Splash Cover
“B” Flat Beater Bowl Scraper
“C” Wing Whip Bowl Truck
“D” Wire Whip 40 Quart Accessories
“ED” Dough Hook Ingredient Chute
“P” Pastry Knife 9″ Vegetable Slicer
“I” Heavy Duty Wire Whip Meat Chopper Attachment
Bowl Extension Ring
WARRANTY: Unit has full one-year warranty on parts,
labor and mileage against manufacturer’s defects.Service contracts are available.