, ,

Hobart 4146 Commercial Meat Grinder – #32 Head

Brand:

Hobart Commercial Meat Grinder 4146  comes with 5 H.P. motor,Magnetic starter,215 RPM transmission,No. 46 wide-mouth grinding end,14 gauge tinned steel feed pan.

Spec Sheet Warranty

For more information about lease and rent options please call us at (604) 569-3400.


Enter email/phone to get a special price.

Call for Pricing:(604) 569-3400

GENERAL: The Model 4146 grinds fresh or tempered frozen meat
(above 26°F). This grinder is designed for the fast, clean cutting of meat
where high-quality ground products are of prime importance.
MOTOR: Hobart designed 5 H.P., heavy duty. Front ball bearing
receives oil lubrication from transmission. Rear ball bearing is greasepacked, sealed for life. Ventilation is provided through screened
openings in base.
ELECTRICAL: 200/60/3 and 230/60/3 — UL Listed. 380/50/3 — Not
submitted for UL Listing.
MOTOR CONTROLLER: Magnetic starter featuring automatic
resetting bimetallic thermal overload protection. Starter is mounted
inside machine enclosure and actuated by rubber-capped pushbuttons
located on right side of machine for standard right-to-left operation.
TRANSMISSION: Geared, double reduction, consisting of oillubricated hardened helical cut steel gears. Worm speed is 215 RPM.
Thrust from grinder worm is taken by a large tapered roller bearing
mounted in attachment hub on face of transmission housing. Double
seals prevent loss of oil or entrance of moisture.
GRINDER END: This unit is supplied with a No. 46 wide-mouth grinding end with a separate cast-iron bowl. The cylinder is removable when
the pan is unclamped and raised to rest on a support provided to hold it
in a tilted position. The grinding end is mounted to the transmission on
two studs. It can be removed easily by loosening two cylinder nuts and
rotating the cylinder a few degrees until the mounting flange clears the
nuts. The cylinder is a spiral fluted type, equipped with a deep-fluted
worm, designed for standard No. 32 knives and plates (not furnished).
The cylinder, bowl, worm, and adjusting ring are heavily tinned cast
iron.
CAPACITY: The Model 4146 Grinder has a fresh beef capacity of
60 to 65 pounds per minute, first cutting, through a 1⁄8″ plate and 45 to 50 pounds of beef per minute, second cutting, through a 1⁄8″ plate.
SAFETY SYSTEM: Model 4146 Grinder combines operator safety with
maximum capacity. A cast aluminum guard is permanently mounted to
the sides of the pan. This guard, plus the unique bowl design, protects
from accidental contact with the worm. An electrical interlock system
is provided which prevents the machine from running or being started
when the bowl and the pan are not in their proper operating locations.
FEED PAN: Feed pan features large capacity and high back (9″),
measures 49″ long, 26 3⁄4″ wide, and 4 1⁄2″ deep at front edge. Furnished
in heavily tinned 14 gauge steel—or available (at extra cost) in 14 gauge
stainless steel. Cast aluminum guard, assuring ease of feeding along
with maximum safety, is mounted to the sides of the pan with hardened
steel drive screws.
LEGS: Standard leg length (16″) provides 21 3⁄4″ clearance between
floor and lowest point on adjusting ring. One leg is adjustable for leveling. Legs are steel with a painted finish. Optional leg lengths that are
available — 16″, 18 1⁄2″, 21″.
STANDARD EQUIPMENT: Consists of working power unit with
magnetic-type starter and pushbuttons completely wired to motor;
waterproof junction box on rear of machine requiring only power connection; Hobart grinding end; high back, large-capacity tinned feed
pan with guard; stainless steel meat deflector mounted to grinding end;
plastic feed stomper; wrench (for loosening cylinder nuts); 16″ legs.
This unit uses No. 32 knives and plates (not furnished).
STAY-SHARP KNIFE & PLATES: The Hobart Stay-Sharp knife &
plates are made from an alloy steel that holds its edge longer than
standard carbon steel. Stay-Sharp plates also can be resharpened
many more times than regular plates. These two features allow a
substantial lifetime cost benefit with the Hobart Stay-Sharp plates.
FINISH: The housing is in stainless steel.
SANITATION: The motor and transmission are totally enclosed by
housing and base plate. Two openings in the base screened with perforated metal provide ventilation for the motor. All machines parts that
have direct contact with the product are easily removed for cleaning or
easily cleaned in place. The machine surfaces are smooth and free of
unnecessary edges, cracks, and screw heads to simplify cleaning.
WEIGHT: The grinder is shipped as four separate components – the base grinder unit, the chop end, the pan, and the legs

SKU: 4146 Categories: , ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Hobart 4146 Commercial Meat Grinder – #32 Head”

There are no reviews yet.