Carter-Hoffmann HL7-8 HotLogix Heated Holding Cabinet – 322 LbBrand: Carter-Hoffmann
SIMPLE DIAL CONTROL… Dial in temperature from
85°F to 200°F. Dial type temperature readout.
PRECISION ENGINEERED HEAT DUCT SYSTEM…
Stainless steel heat duct provides even and efficient
heating throughout the entire cabinet for safe and
consistent results. Temperature stratification throughout
cabinet during preheat and hold is less than 2°F (NSF
test protocol). Quick heat recovery. Ducts removable
without tools for easy cleaning.
FIELD REVERSIBLE DOOR(S)… Double panel, fully
insulated, with magnetic door latch and heavy-duty
hinges. Full perimeter silicone gasket attached to
FOUR CABINET SIZES… Under-counter, 1/2 height, 3/4 height and full height cabinets with true
capacities. Cabinets have adjustable universal slides for 12”x20”, 18”x26” and Gastronorm pans.
Optional fixed angle sides for 18”x26” sheet pans.
Rent: $67 / week
Lease: $135 / mo.
For more information about lease and rent options please call us at (604) 569-3400.
cabinet construction with outer cabinet
welded to base. All seams turned in to
eliminate raw edges.
CABINET MATERIAL…All stainless steel
construction; 20 gauge polished exterior and
18 gauge interior.
BASE FRAME…12 gauge stainless steel full
depth caster bolsters with 12 gauge
stainless steel perimeter supports welded to
CASTERS…5” diameter casters with rubber
tread (3” casters on HWU5). Four swivel
casters. Two casters fitted with brakes.
INSULATION…2” thick high density
continuous wrap-around type fiberglass
DOOR…Welded double panel stainless steel
door; 20 gauge polished exterior and 20
gauge interior. Filled with 2” thick high
density fiberglass insulation. Field
HINGES…Adjustable edge mount hinges
with chrome plate finish.
GASKET…High temperature Teflon gasket
mounted to cabinet.
HANDLES… Four recessed pull grips on
sides of cabinet.
LATCH…Heavy-duty edge mount latch with
TRAY RACK ASSEMBLY…Removable 18
gauge stainless steel ducts. with removable
16 gauge stainless steel universal slides,
fully adjustable at 1-1/2” spacing. Standard
spacing at 3” centers.
THERMOMETER…Dial thermometer with
remote sensing probe and sensing probe
CONTROLS…Dial temperature control knob
and temperature display.
HEATING SYSTEM…Top mounted blower
heater for even heat distriubution. High
impedence protected, internally cooled fan
motor. Single cooling fan. Full range
thermostat and on/off switch with power
HL7-5 & HL7-8 operate on 120 volts, 60
cycle, single phase, 1100 watts, 9.2 amps.
Ten foot rubber cord with 3 pring grounding
plug. NEMA 5-15P. HL7-14 & HL7-18
operate on 120 volts, 60 cycle, single
phase, 2100 watts, 17.5 amps. Ten foot
rubber cord with 3 prong grounding plug.
PERFORMANCE…Capable of heating to
200°F (93°C). Preheat to 160°F (71°C) in
approximately 25 minutes.