Carter-Hoffmann BB96 Commercial Banquet Carter – 96 PlatesBrand: Carter-Hoffmann
6” DIAMETER INDUSTRIAL GRADE CASTERS
WITH POLYURETHANE TREAD… Long lasting
and easy rolling for maximum load and minimum
maintenance. Two swivel and two rigid. Swivel
casters fitted with brakes. Mounted to base in offset
wheel-ahead pattern for easy rolling over uneven
HIGH PERFORMANCE REMOVABLE HEATER…
Blower system for fast heat up, recovery and even
heat distribution throughout cabinet. Removable
without tools for easy service and cabinet cleaning.
STEEL BASE FRAME… 12
gauge caster bolsters with
perimeter frame for rugged
use and added durability.
CABINET… Strongest, most
durable materials for long
life. High density 1” thick
fiberglass in walls and door,
1 1/2” thick on top for
maximum heat retention.
Rent: $62 / week
Lease: $124 / mo.
For more information about lease and rent options please call us at (604) 569-3400.
double wall cabinet construction with
outer cabinet formed and welded to base.
All seams turned in to eliminate raw
CABINET MATERIAL…All stainless steel
construction; 20 gauge polished exterior
and 24 gauge interior.
BASE FRAME…12 gauge stainless steel
full depth bolsters with 1”x1” stainless
steel perimeter channel supports.
CASTERS…6” diameter, industrial grade
polyurethane casters. Two swivel and two
rigid. Sealed roller axle bearing and
double ball bearing swivel. Plate
mounted and bolted to base in offset
“wheel ahead” pattern. Two casters fitted
BUMPER…Non-marking gray vinyl
bumper set in heavy duty 3/16” extruded
aluminum frame with reinforced corner
INSULATION…1” thick high density
continuous wrap-around type fiberglass
insulation with 1 1/2” thickness on top.
GASKET…High temperature silicone
DOORS…Welded double stainless steel
door. Filled with 1” thick fiberglass
insulation. BB200D features Dutch doors.
HINGES…Concealed, stainless steel
hinge with 5/16” pin.
PUSH HANDLES… Two horizontal full
width stainless steel tubular push handles
with back-up plates. Mounted to each
end of the cabinet.
LATCHES…Flush mounted, heavy-duty
sliding latch(es) with exclusive grip
SHELVES…Welded, duplex nickel-plated
removable wire shelves.
THERMOMETER…Dial type with remote
sensing bulb and sensing bulb protector.
Mounted to door.
HEATING SYSTEM…Bottom mounted
heater. Stainless steel construction.
Removable without tools. 1600 watt
inconel-sheathed heating element. High
impedance protected, internally cooled
fan motor. Full range thermostat and
power indicating light.
Operates on 120 volts, 60 cycle, single
phase, 1650 watts, 13.7 amps. Ten foot
rubber cord with 3 pring grounding plug.
NEMA 5-15P plug.
PERFORMANCE…Capable of heating to
200°F (94°C). Preheat to 160°F (71°C)
in approximately 20 minutes.
rigidity to entire cabinet and
eliminates raw edges for
ease of cleaning and
REMOVABLE WIRE SHELVES…Welded, duplex
nickel-plated with reinforced shelf clips. Sturdy for
heavy plate loads and removable for cleaning.
aluminum bumper with nonmarking gray vinyl insert.
Protects cart and facility
walls from damage.