Hobart HL662-1STD Legacy Pizza Mixer – 60 Qt
Brand: HobartHobart Legacy Pizza Mixer HL662-1STD comes with, Heavy-Duty 2.7 H.P. Motor, Gear Transmission Specifications, Details and Dimensions on Inside and Back. Two Fixed Agitator Speeds.
Spec Sheet WarrantyRent: $233 / week
Lease: $437 / mo.
For more information about lease and rent options please call us at (604) 378-4013.
MOTOR:
2.7 H.P. high torque motor.
200-240/50/60/3/1 18.0 (1 Phase) Amps
10.0 (3 Phase) Amps
380-460/50/60/3 6.5 Amps
ELECTRICAL:
200-240/50/60/3/1, 380-460/50/60/3 – UL Listed.
CONTROLS:
Magnetic contactor with thermal overload protection.
Internally sealed “Start-Stop” and Power Bowl Lift
push buttons. Reduced voltage pilot circuit transformer is supplied for 380-460/50/60/3 machines.
A 50-minute SmartTimer™ is standard. SmartTimer™
includes Automatic Time Recall, which remembers
the last time set for each speed.
TRANSMISSION:
A rated 5.4 H.P. poly-V belt transfers power from
motor to the input shaft then geared down to desired
reduction with a constant gear mesh. Gears and
shafts are heat-treated hardened alloy steel along
with anti-friction ball bearings. Circulating oil and
grease lubricants furnished to all gears and shafts.
BOWL GUARD:
Heavy-duty stainless steel wire front and solid
stainless steel rear portion. Front portion of guard
rotates easily to add ingredients and install or
remove agitator. It detaches in seconds for cleaning
in dishwasher or sink. Rear portion of guard can be
quickly cleaned in position. Guard must be in closed
position before mixer will operate. Bowl support
interlock provides further protection.
POWER BOWL LIFT:
Powered by an electric motor, the bowl may be raised
or lowered by fingertip control through the conveniently
located switch. Bowl will remain in position until switch
is activated. Stir-on-Lift Feature: Allows the agitator
to run in Stir Speed while the mixer bowl is being
raised. Once the bowl is in the raised position, the
mixer automatically shifts into the preselected speed.
FINISH:
Metallic Gray Hybrid Powder Coat finish.
FOOTPADS:
Neoprene footpads are standard.
ATTACHMENT HUB:
Comes with front-mounted Hobart standard #12 taper
attachment hub for use with #12 size attachments.
ATTACHMENTS AND ACCESSORIES:
The following are available at extra cost:
Stainless Steel Bowl
“B” Flat Beater Bowl Splash Cover
“C” Wing Whip Bowl Truck
“D” Wire Whip 40 Quart Accessories
“ED” Dough Hook Ingredient Chute
“P” Pastry Knife 9″ Vegetable Slicer
“I” Heavy Duty Wire Whip Meat Chopper Attachment
Bowl Extension Ring
WARRANTY: Unit has full one-year warranty on parts,
labor and mileage against manufacturer’s defects.
Service contracts are available.
Based on 0 reviews
Be the first to review “Hobart HL662-1STD Legacy Pizza Mixer – 60 Qt” Cancel reply
You must be logged in to post a review.
Related products
-
Food Prep, Dough Prep, Dough Sheeters
Somerset CDR-300 Commercial Dough Sheeter – 15″
0 out of 5(0)Somerset Commercial Dough Sheeter CDR-300 comes with Rollers: 3.5” (9cm) dia. by 15” (38cm) length .Scrapers: Synthetic, Spring Loaded, Removable
Bearings: Sealed Ball Bearings, Permanently Lubricated.SKU: CDR-300 -
Food Prep, Dough Prep, Dough Sheeters
Doyon DL12SP Roller Dough Sheeter – 12″ – One Stage, Parallel
0 out of 5(0)Sheet dough up to 12” (305 mm) in diameter to a uniformed thickness in seconds. One operator can make up to 250 pieces per hour in just two easy steps.
The Quick Change Index System quickly changes the gap between the dough rollers.SKU: DL12SP -
Food Prep, Dough Prep, Dough Sheeters
Somerset CDR-100 Commercial Dough Sheeter – 10″
0 out of 5(0)Somerset Commercial Dough Sheeter CDR-100 comes with Scrapers: Synthetic, spring loaded, removable.Rollers: Synthetic, non-sticking.Bearings: Sealed ball bearings.Finishing: All stainless steel.
SKU: CDR-100 -
Food Prep, Dough Prep, Dough Presses
Doughxpress DXM-SS Commercial Manual Pizza Press – 120/220V
0 out of 5(0)The DXM-SS commercial manual pizza dough press is perfect for medium to high production volumes (100-150/hr). It’s heavy duty stainless steel construction,cam over-lock make it the top manual press in the industry.
SKU: DXM-SS











There are no reviews yet.